Skip to main content

MA

Choate Bridge
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1750-1799 DateCreated: 1764 River Ipswich State: MA Zip: 01938 Country: USA Website: http://www.asce.org/Project/Choate-Bridge/ Creator: Choate, John

The Choate Bridge of Essex County, completed in 1764, is the oldest documented two-span masonry arch bridge in the United States. Named after Colonel John Choate, who supervised the construction, the bridge is located on South Main Street and spans the Ipswich River. Originally, the bridge measured 80 feet 6 inches long and 20 feet 6 inches wide. In 1838 it was widened to 35 feet 6 inches on the east side in order to accommodate another lane of traffic. The west side and the parapet of the bridge, along with the inscription to Colonel Choate, remained unchanged.

YearAdded:
2008
Image Credit: Public Domain (National Park Service) Image Caption: Choate Bridge Era_date_from: 1764
Cape Cod Canal
Society: ASCE Main Category: Civil Sub Category: Water Transportation Era: 1900-1909 DateCreated: 1909-1914 Cape Cod State: MA Zip: Country: USA Website: http://www.asce.org/Project/Cape-Cod-Canal/ Creator: Parsons, William Barclay

The idea of a canal eliminating the costly and dangerous sea trip around the Massachusetts peninsula of Cape Cod was envisioned as early as 1623 by Pilgrim leader Miles Standish. It was not until financier August Belmont became involved in 1906, however, that sufficient funds for the project could be raised. Belmont had been the primary backer of New York City's first subway, and chose the subway's chief engineer, William Barclay Parsons, as the canal's project director.  

YearAdded:
1985
Image Credit: Courtesy nae.usace.army.mil Image Caption: Cape Cod Canal Era_date_from: 1909
Canton Viaduct
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1830-1839 DateCreated: 1835 Canton State: MA Zip: Country: USA Website: http://www.asce.org/Project/Canton-Viaduct/ Creator: McNeill, William Gibbs , Whistler, George Washington

For more than 174 years, the Canton Viaduct has stood as a dominating structure on the New England landscape. When completed in 1835, the slightly curved, granite masonry bridge - 615 feet long, 70 feet high, and 22 feet wide - carried a single track of the Boston and Providence Railroad, providing a critical link in the establishment of rail service between Boston and New York. In 1860, a second track was added. With few major alterations, the viaduct has continued to provide safe rail transportation to heavier and faster loads throughout the 20th century.

YearAdded:
1998
Image Credit: Public Domain (Author's Choice) Image Caption: Canton Viaduct Era_date_from: 1835
Boston Subway
Society: ASCE Main Category: Civil Sub Category: Roads & Rails Era: 1910-1919 DateCreated: 1897 Boston State: MA Zip: Country: USA Website: http://www.asce.org/Project/Boston-Subway/ Creator:

By the 1890s, the transportation infrastructure of downtown Boston - a maze of narrow, winding streets laid out, in some cases, along Colonial cow paths - proved completely inadequate for the needs of a modern, bustling metropolis. Tremont Street, the city's main thoroughfare, was regularly subject to gridlock from a convergence of foot traffic, horse-drawn conveyances, trolley lines, and electric streetcars. To rectify the problem, the Boston Transit Commission, with Howard A. Carson as chief engineer, was created in 1894 to study remedies. 

YearAdded:
1978
Image Credit: Courtesy Flickr/Kan Wu (CC BY 2.0) Image Caption: Prudential Station of the Boston Subway Era_date_from: 1897
Society: ASME Main Category: Mechanical Sub Category: Research and Development Era: 1900-1909 DateCreated: 1908 Alden Research Laboratory Holden State: MA Zip: 01520 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/research-and-development/-75-alden-research-laboratory-rotating-boom-%281908%29 Creator: Allen, Charles M.
The idea of constructing a rotating boom for hydromechanical tests at the Alden Hydraulic Laboratory originated with Professor Charles Metcalf Allen, head of the lab from 1896 to 1950. The original boom was designed in 1908 by Professor Allen, assisted by two Worcester Polytechnic Institute students. Professor Allen needed a moving test stand for hydraulic experiments and for rating current meters.
YearAdded:
1982
Image Credit: Courtesy ASME Image Caption: L.J. Hooper (left), Charles M. Allen (center) and Clyde W. Hubbard (right) sit together on the rotating boom. Era_date_from: 1908
Saugus Ironworks
Society: ASME Main Category: Mechanical Sub Category: Minerals Extraction & Refining Era: 1600s DateCreated: 1647 Ironworks National Historic Site Saugus State: MA Zip: 01906 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/minerals-extraction-and-refining/-7-saugus-ironworks-%281647%29, https://www.asme.org/getmedia/f0a3f427-43a2-4371-aa52-73a1b579d9e0/7-Saugus-Ironworks.aspx Creator: Winthrop the Younger, John

The Saugus Ironworks, the first commercial ironworks in North America, was an impressive technological achievement for an early colony. The same basic processes are used today: reducing iron oxide with carbon to produce metallic iron that can be cast in a mold, producing wrought iron by puddling cast iron, and fabricating wrought iron with power hammer and rolls.

YearAdded:
1975
Image Credit: Courtesy Flickr/Kristin Shoemaker (CC BY-ND 2.0) Image Caption: One of the Saugus Ironworks' water wheels in motion Era_date_from: 1647
Wyman-Gordon 50,000-ton Hydraulic Forging Press
Society: ASME Main Category: Mechanical Sub Category: Manufacturing Era: 1950-1959 DateCreated: 1954 Wyman-Gordon Company Worcester State: MA Zip: 01615 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/manufacturing---1/89-wyman-gordon-50-000-ton-hydraulic-forging-pres, https://www.asme.org/wwwasmeorg/media/ResourceFiles/AboutASME/Who%20We%20Are/Engineering%20History/Landmarks/89-wyman-gordon-50000-ton-hydraulic-forging-press.pdf Creator:

This hydraulic closed-die press, among the largest fabrication tools in the world, has had a profound influence in America's leading role in commercial aircraft, military aircraft, and space technology. As part of the same Heavy Press Program that created the Mesta press, the Wyman-Gordon press was designed by the Loewy Construction Company and began operating in October 1955. Among its contributions was the development of the new jetliner Boeing 747 in the 1960s.

YearAdded:
1983
Image Credit: Courtesy ASME Image Caption: Wyman-Gordon 50,000-ton Hydraulic Forging Press Era_date_from: 1954
Lowell Waterpower System
Society: ASCE Main Category: Civil Sub Category: Power Generation Era: 1800-1829 DateCreated: 1821 National Historical Park Lowell State: MA Zip: 01854 Country: USA Website: http://www.asce.org/Project/Lowell-Waterpower-System/ Creator: Francis, James B.

Much of the sophisticated system of canals, dams, gates, and tunnels built to manage water power in 19th-century Lowell is preserved today as the basis of the Lowell National Historical Park and the Lowell Heritage State Park. Pictured above is the Boott Penstock, an early channel adjacent to the Boott Mills (right).

YearAdded:
1984
Image Credit: Courtesy Flickr/Leonora Enking (CC BY-SA 2.0) Image Caption: Lowell Waterpower System: Pawtucket Gatehouse Era_date_from: 1821
Subscribe to MA

We hope you enjoyed this essay.

Please support this 70-year tradition of trusted historical writing and the volunteers that sustain it with a donation to American Heritage.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.