Skip to main content

1983

Ohio Canal System
Society: ASCE Main Category: Civil Sub Category: Water Transportation Era: 1800-1829 DateCreated: 1825 N/A State: OH Zip: Country: USA Website: http://www.asce.org/Project/Ohio-Canal-System/ Creator: Ohio, State of

Between 1825 and 1847 the State of Ohio constructed 1,000 miles of canals and feeder canals, 33,000 acres of reservoir surface area, 29 dams across streams, 294 lift locks, 44 aqueducts and many smaller structures at a cost of about 16 million dollars. The network of navigable canals provided a system of economical transportation where none had previously existed; the young state, with its isolated frontier lifestyle, was transformed almost overnight into a thriving segment of the nation's economy.

YearAdded:
1983
Image Credit: Courtesy Wikipedia Image Caption: A part of the Ohio Canal System in 1902. Era_date_from: 1825
Xerography
Society: ASME Main Category: Mechanical Sub Category: Communications and Data Processing Era: 1940-1949 DateCreated: 1948 Battelle Memorial Institute Columbus State: OH Zip: 43201-2693 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-a-l/communications-and-data-processing/-88-xerography-%281948%29-, https://www.asme.org/getmedia/540c9932-b7e2-4884-8060-de35b8146064/88-Xerography.aspx Creator: Carlson, Chester

The convenient dry-copying process for printed pages is among the truly revolutionary inventions of the century. In 1937 Chester Carlson, a New York patent attorney, developed the concept of applying an electrostatic charge on a plate coated with a photoconductive material. On November 22, 1938, Carlson dusted powder dyed with evergreen spores across an exposed plate and transferred the imprint to the surface of a paper.

YearAdded:
1983
Image Credit: Courtesy Xerox Corporation Image Caption: Xerography Era_date_from: 1948
Sault Ste. Marie Hydroelectric Complex
Society: ASCE Main Category: Civil Sub Category: Power Generation Era: 1900-1909 DateCreated: 1902 Salmon Run Way Sault Ste. Marie State: MI Zip: 49783 Country: USA Website: http://www.asce.org/project/sault-ste--marie-hydroelectric-power-complex/ Creator: Modjeski, Ralph , Noble, Alfred

Located at the northern tip of Michigan where Lake Superior, Lake Michigan, and Lake Huron join together, the Sault Ste. Marie Hydroelectric Power Complex was built to harness the hydroelectric potential of the  20-foot falls at the headwaters of the St. Marys (sic) River, the sole outlet of Lake Superior. A century after its construction, the  plant remains the largest low-head hydroelectric facility in the United States. Today, the Sault Ste. Marie plant supplies electricity to area residents, especially those in the Upper Peninsula of Michigan.

YearAdded:
1983
Image Credit: Courtesy Flickr/Madison Berndt (CC BY 2.0) Image Caption: Sault Ste. Marie Hydroelectric Complex Era_date_from: 1902
Manufacturer’s identification plaque
Society: ASME Main Category: Mechanical Sub Category: Minerals Extraction & Refining Era: 1890-1899 DateCreated: 1895 Reed Gold Mine Historic Site Midland State: NC Zip: 28107 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/minerals-extraction-and-refining/-84-reed-gold-mine-ten-stamp-mill-%281895%29 Creator: Mecklenburg Iron Works

The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848. This mill, built by the Mecklenburg Iron Works of Charlotte, North Carolina, is original except for the timber work. Two groups of five 750-pound stamps with 5- to 7-inch lift, rose and fell thirty-five times a minute to yield a finely crushed ore.

YearAdded:
1983
Image Credit: Image Caption: Manufacturer’s identification plaque Era_date_from: 1895
Reed Gold Mine Ten-Stamp Mill
Society: SME (mining) Main Category: Mining Sub Category: Minerals Extraction & Refining Era: 1890-1899 DateCreated: 1895 Reed Gold Mine Historic Site Midland State: NC Zip: 28107 Country: USA Website: http://www.smenet.org/ Creator: Mecklenburg Iron Works

The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848. This mill, built by the Mecklenburg Iron Works of Charlotte, North Carolina, is original except for the timber work. Two groups of five 750-pound stamps with 5- to 7-inch lift, rose and fell thirty-five times a minute to yield a finely crushed ore.

YearAdded:
1983
Image Credit: Photo Courtesy of North Carolina Department of Cultural Resources. Image Caption: The Stamp Mill at the Reed Gold Mine in Midland, NC. Era_date_from: 1895
Peavey-Haglin Concrete Grain Elevator
Society: ASCE Main Category: Civil Sub Category: Buildings Era: 1900-1909 DateCreated: 1900 5505 Minnesota 7 Service Rd St. Louis Park State: MN Zip: 55416 Country: USA Website: http://www.asce.org/project/peavy-haglin-concrete-grain-elevator/ Creator: Peavy, Frank , Haglin, Charles

No image dominates the Midwestern landscape like the monolithic grain elevator, whose present shape and construction owe much to grain company operator Frank Peavy and architect-builder Charles Haglin.

Wanting to improve on the flammability and cost of traditional wood-cribbed construction, Peavy speculated that reinforced concrete, in its infancy at the turn of the century, would outperform other materials. But critics feared that the elevator would collapse due to the vacuum created when grain was emptied from the air-tight structure.

YearAdded:
1983
Image Credit: Courtesy Wikipedia/Original Uploader was Elkman (CC BY-SA 3.0) Image Caption: Peavey-Haglin Concrete Grain Elevator Era_date_from: 1900
NS Savannah
Society: ASME Main Category: Mechanical Sub Category: Water Transportation Era: 1960-1969 DateCreated: 1962 4601 Newgate Ave Baltimore State: MD Zip: 21224 Country: USA Website: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/87-ns-savannah Creator: New York Shipbuilding Corporation, Babcock & Wilcox Company

The N.S. Savannah was the first nuclear-powered cargo-passenger ship, built by the New York Shipbuilding Corporation at Camden, New Jersey. The 74 maximum-power thermal megawatt pressurized-water reactor was supplied by the Babcock & Wilcox Company. Nearly 600 feet long with 22,000-tons displacement, the ship at top speed surged along at 24 knots, with more than 22,300 shaft horsepower to a single propeller. A joint venture by the U.S. Maritime Administration and the Atomic Energy Commission to the design of George G. Sharp Inc.

YearAdded:
1983
Image Credit: Public Domain (U.S. Government) Image Caption: NS Savannah Era_date_from: 1962
Society: ASME Main Category: Mechanical Sub Category: Food Processing Era: 1940-1949 DateCreated: 1947 FMC Corporation (Item no longer exists) Lakeland State: FL Zip: 33801 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-a-l/food-processing/-82-fmc-citrus-juice-extractor-%281947%29--- Creator: FMC Corporation, Sunkist Corporation
Squeezing an orange for juice is part of the concept of this machine, only on a much larger scale. The extractor revolutionized the juice industry. The twenty-four head rotary action simultaneously extracts juice from the interior of the fruit and citrus oil from the peel surface. The first unit was operated experimentally on grapefruit at the Sunkist Exchange plant in Tempe, Arizona, during late May of 1946. Tests on citrus fruits continued in California, Texas, and Florida.
YearAdded:
1983
Image Credit: Courtesy ASME Image Caption: FMC Citrus Juice Extractor Era_date_from: 1947
Society: ASME Main Category: Mechanical Sub Category: Manufacturing Era: 1920-1929 DateCreated: 1926 The Henry Ford Museum Dearborn State: MI Zip: 48124 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/manufacturing---1/-81-corning-ribbon-machine-%281926%29 Creator: Woods, William , Corning Glass Works
While Thomas Edison perfected the first practical and durable filament in 1879, it was not until much later that electricity left the laboratory to become the universal source of light. This required a tremendous number of glass envelopes for light bulbs. In the 1890s the top speed of the finest glass-blowing team produced two bulbs a minute.
YearAdded:
1983
Image Credit: Original Image: Courtesy Flickr/ellenm1 (CC BY 2.0) Image Caption: Corning Ribbon Machine Era_date_from: 1926
Blenheim Bridge
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1850-1859 DateCreated: 1855 Schoharie Creek (No longer) Gilboa State: NY Zip: 12076 Country: USA Website: http://www.asce.org/project/Blenheim-Bridge/ Creator: Powers, Nichols Montgomery , Blenheim Bridge Company

Nicholas Montgomery Powers built the bridge. It was first constructed behind the village, then taken apart and reassembled over the stream. Some residents questioned the idea of re-constructing it, but Powers was so confident of the bridge's durability that he sat on the roof when the final trestles supporting it were removed. From his perch he reportedly said: "If the bridge goes down, I never want to see the sun rise again!"

YearAdded:
1983
Image Credit: Courtesy Flickr/Doug Kerr (CC BY-SA 2.0) Image Caption: The view entering the Blenheim Bridge, before it was destroyed. Era_date_from: 1855
Subscribe to 1983
Owens AR Bottle Machine

Only since 1912 have glass jars and bottles been in cheap and plentiful supply for pharmaceuticals, household products, food and beverages, and an endless variety of uses. The bottle-making machine introduced the safety, standardization, quality, and convenience of glass containers. Not only did…

Read More
Penn. RR GG1 Electric Locomotive #4800

The 4,620-horsepower GG1 was primarily a passenger locomotive, routinely operating at over 100 miles per hour, but was used in freight service as well. Conceived by the Pennsylvania Railroad and built by the Baldwin Locomotive Works and General Electric Company, No. 4800 logged nearly 5 million…

Read More
PACECO Container Crane

The world's first high-speed, dockside container-handling cranes reduced ship turnaround time from three weeks to eighteen hours. They became the model and set the standard for future designs worldwide. In service January 7, 1959, the A-frame cranes built at Encinal Terminals in Alameda,…

Read More
Wyman-Gordon 50,000-ton Hydraulic Forging Press

This hydraulic closed-die press, among the largest fabrication tools in the world, has had a profound influence in America's leading role in commercial aircraft, military aircraft, and space technology. As part of the same Heavy Press Program that created the Mesta press, the Wyman-Gordon press…

Read More
Atlantic City Convention Hall

The quantities of materials used in the building are staggering: 12,000 tons of structural steel; 42,000 cubic yards of concrete - consisting of 65,000 barrels of cement and 25,000 tons of sand; 360,000 feet of piling; and 10,000,000 bricks. At the time of its construction, Atlantic City…

Read More
Bailey Island Bridge

Hardy fishermen and their families have long inhabited Bailey Island, which was settled in the 1720s. Ordinarily, they did not mind crossing to the mainland in their fishing boats. But before the Bailey Island Bridge was built, during certain seasons of the year when violent storms battered the…

Read More
Blenheim Bridge

Nicholas Montgomery Powers built the bridge. It was first constructed behind the village, then taken apart and reassembled over the stream. Some residents questioned the idea of re-constructing it, but Powers was so confident of the bridge's durability that he sat on the roof when the final…

Read More
While Thomas Edison perfected the first practical and durable filament in 1879, it was not until much later that electricity left the laboratory to become the universal source of light. This required a tremendous number of glass envelopes for light bulbs. In the 1890s the top speed of the finest… Read More
Squeezing an orange for juice is part of the concept of this machine, only on a much larger scale. The extractor revolutionized the juice industry. The twenty-four head rotary action simultaneously extracts juice from the interior of the fruit and citrus oil from the peel surface. The first unit… Read More
NS Savannah

The N.S. Savannah was the first nuclear-powered cargo-passenger ship, built by the New York Shipbuilding Corporation at Camden, New Jersey. The 74 maximum-power thermal megawatt pressurized-water reactor was supplied by the Babcock & Wilcox Company. Nearly 600 feet long with 22,000-tons…

Read More
Peavey-Haglin Concrete Grain Elevator

No image dominates the Midwestern landscape like the monolithic grain elevator, whose present shape and construction owe much to grain company operator Frank Peavy and architect-builder Charles Haglin.

Wanting to improve on the flammability and cost of traditional wood-cribbed…

Read More
Reed Gold Mine Ten-Stamp Mill

The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848.…

Read More
Manufacturer’s identification plaque

The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848.…

Read More
Sault Ste. Marie Hydroelectric Complex

Located at the northern tip of Michigan where Lake Superior, Lake Michigan, and Lake Huron join together, the Sault Ste. Marie Hydroelectric Power Complex was built to harness the hydroelectric potential of the  20-foot falls at the headwaters of the St. Marys (sic) River, the sole outlet of…

Read More
Xerography

The convenient dry-copying process for printed pages is among the truly revolutionary inventions of the century. In 1937 Chester Carlson, a New York patent attorney, developed the concept of applying an electrostatic charge on a plate coated with a photoconductive material. On November 22, 1938…

Read More
Ohio Canal System

Between 1825 and 1847 the State of Ohio constructed 1,000 miles of canals and feeder canals, 33,000 acres of reservoir surface area, 29 dams across streams, 294 lift locks, 44 aqueducts and many smaller structures at a cost of about 16 million dollars. The network of navigable canals provided a…

Read More

We hope you enjoyed this essay.

Please support this 70-year tradition of trusted historical writing and the volunteers that sustain it with a donation to American Heritage.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.