The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848. This mill, built by the Mecklenburg Iron Works of Charlotte, North Carolina, is original except for the timber work. Two groups of five 750-pound stamps with 5- to 7-inch lift, rose and fell thirty-five times a minute to yield a finely crushed ore.
ASME
Term Image
YearAdded:
Image Credit:
Image Caption:
Manufacturer’s identification plaque
Era_date_from:
1895
1983
This mechanism allowed the manual closing of a well, saved lives and prevented surface oil accumulation at drilling sites, quickly becoming an industry standard. In the early days of oilfield operations, there was no way to control the underground pressures encountered during drilling. When an oil or gas reservoir was tapped, wells were allowed to "blow out" until pressure was reduced sufficiently to allow capping. Many inventors attempted to develop a device to control such blowouts. In 1922, oil wildcatter James Smither Abercrombie (1891-1975) and machinist Harry S.
YearAdded:
Image Credit:
Original Image: Flickr/Ed Schipul (CC BY-SA 2.0)
Image Caption:
A modern Blowout Preventer (BOP)
Era_date_from:
1922
2003
In fulfilling a contract for 25,000 U.S. Army rifles (Model 1841) and a like quantity for the British government, Robbins and Lawrence were the first to achieve interchangeability of parts on a fully practical level, contributing greatly to all subsequent mass production of machine products. This was made possible by the systematic improvement and refinement of existing standard and special-purpose machine tools, enabling them to perform with the close-limit precision essential for "repeatability" and thus interchangeability (see the American Precision Museum).
YearAdded:
Image Credit:
Courtesy Flickr/Liz West (CC BY 2.0)
Image Caption:
American Precision Museum
Era_date_from:
1966
1987
Steam and the inexpensive electricity it could produce brought about dramatic technical growth in the United States. Developed during the last century, reliable and efficient steam engines were the forerunners of today's massive generating facilities. A rare survivor of the period, the Pratt facility is the oldest generating plant of its kind in the Northeast and embodies the typical features of engines in a row, open-front marble switchboard, and an observation balcony at street level.
YearAdded:
Image Credit:
Public Domain (National Park Service)
Image Caption:
Pratt Institute Power Plant
Era_date_from:
1887
1977
The Port Washington Power Plant of the Wisconsin Electric Company was the most thermally efficient steam power plant in the world for many years following its opening in 1935. Its design reflected the cumulative experience of the utility's engineers in burning pulverized coal at the Oneida Street Plant and the Lakeside Station in Milwaukee.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
The dedication of Port Washington Power Plant coincided with the 100th anniversary of the founding of the city in which it is located.
Era_date_from:
1935
1980
Used to lift molten iron to molds where it was cast into pipe, jib cranes were the sole means of conveyance in the pit-casting process. When pit casting was replaced by centrifugal casting in the 1920s, many pits were filled and the cranes were used to produce cast iron fittings or general maintenance work. Only one jib crane remained at the American Cast Iron Pipe Company in recent years, and it was probably the last pit-cast jib crane to operate, which it did until it was given to the Sloss Furnace Museum in early 1986.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
The crane as it is used today, in general service
Era_date_from:
1905
1977
In the late 1920s, the automobile cut railroad passenger service by more than half. The debut of the Pioneer Zephyr heralded a comeback in 1934, touring the country and being seen by some two million people in 222 cities.
YearAdded:
Image Credit:
Courtesy Flickr/Steve Wilson (CC BY 2.0)
Image Caption:
Pioneer Zephyr
Era_date_from:
1934
1980
The economic situation in the whale oil business (for lighting), coupled with the increased demand for lubricants, stimulated growth in the U.S. petroleum industry. The drilling of the heavy, sulfurous, and asphaltic California crude began in the 1870s at the Pico Canyon area, using the apparatus and techniques from Titusville, Pennsylvania, developments.
YearAdded:
Image Credit:
Courtesy Flickr/Konrad Summers (CC BY-SA 2.0)
Image Caption:
Pioneer Oil Refinery California Star Oil Works
Era_date_from:
1876
1975
This was the first successful machine for mechanizing the identification and price marking of retail merchandise. At a single stroke of the operating handle, the machine formed a tag from a roll of stock, imprinted it with price and other information, formed a wire staple, and stapled the tag to the merchandise. This means for dispensing with handmade and written tags amounted to a minor revolution in the then rapidly expanding retail industry.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
Pin-Ticketing Machine
Era_date_from:
1902
1990
605 Alpnach State: Zip: Country: Switzerland Website: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/220-pilatusbahn, https://www.asme.org/getmedia/8c4b369d-83fd-4b9e-9248-b6d78b28628c/220-Pilatusbahn-1882.aspx Creator: Locher, Eduard , Locher Systems
The Pilatusbahn—the steepest rack railway in the world—has operated successfully since its opening in 1889 over a route of 4.62 kilometers (2.87 miles) between Alpnachstad on Lake Lucerne and Pilatus Kulm, rising 6,791 feet (2,070 meters) above sea level. This results in a gradient of 48%, or a rise of nearly one meter in two meters of run on the steepest sections of the line, which amounts to about a quarter of its length.
YearAdded:
Image Credit:
Courtesy Flickr/Stephane Dewarrat (CC BY-SA 2.0)
Image Caption:
Pilatusbahn
Era_date_from:
1882
2002
On April 21, 1949, a completely outdoor turbine-generator was placed into commercial operation at the Greens Bayou electric power plant--the first fully outdoor unit to operate in the United States. The demand for unprecedented quantities of electricity after World War II pressed utilities to…
Read More
This is an old technology brought here by new immigrants. It represents the beginning of modern life in a hard wilderness. This wind-powered gristmill was built in 1870 by Fred Meiss, Jr., and Otto Fiek near Spring Creek, from parts of the first windmill in the new state of Texas, erected by E.G…
Read More
The Hanford B-Reactor was the first plutonium production reactor to be placed in operation. Its success made possible the subsequent development of atomic energy. The research work, engineering, and planning required to make the reactor operate is one of our most advanced achievements. Much of…
Read More
This 350-horsepower Corliss type steam engine is an example of a typical late nineteenth century steam engine. The essential feature of Corliss type engines is the valves that admit steam to and exhaust it from the cylinder. The Corliss valve gear made the engine extremely efficient in steam… Read More
This landmark artifact represents the first commercially successful farm tractor in the world powered by an internal-combustion engine. It was invented and built by Charles W. Hart and Charles H. Parr in Charles City, Iowa, as their Model 3, following two prototype versions. Major accomplishments… Read More
The first long underwater tunnel in the world designed for motor vehicle use was built from 1920 to 1927. The 29.5-foot-diameter, 8,500-foot-long twin tubes of this tunnel were shield-driven by the pneumatic method through extremely difficult river-bottom conditions that were overcome by the… Read More
The first practical demonstration of this tractor took place in a peat field on Roberts Island on November 24, 1904, and was patented and in production by December of 1907. The existing machine represents the earliest gasoline-powered track-type tractors that were to help revolutionize…
Read More
Known as the Paper City by 1877, this site was a major industrial center with extensive paper mills, textile mills, machine shops, and a water power system that had within a few decades transformed the fields of Ireland Parish into the manufacturing city of Holyoke. A group of Boston investors… Read More
Better known as the "Spruce Goose," the Howard Hughes Flying Boat was designed and built by Hughes Aircraft Co., to be the largest wood-constructed and the largest wingspan airplane ever built. As Hughes perfected his craft, he added significantly to what is known in areas of large-lift…
Read More
Prior to 1909 the traditional fishtail bit scraped the rock and quickly dulled in service. The Hughes two-cone bit's revolutionary rolling action crushed hard-rock formations with twin cone-shaped, hardened steel bits, each with 166 cutting edges, revolving on bronze bearings shaped to provide a…
Read More
In operation since 1944, the Icing Research Tunnel is the oldest and largest refrigerated icing wind tunnel in the world. Technology developed there enables aircraft to fly safely through icing clouds. Two firsts include the unique heat exchanger and the spray system that simulates a natural…
Read More
Plans to build a rapid transit system in New York were first made in 1831. By 1868 the first elevated railway was erected. As the "El" became crowded, construction of an underground railway was proposed. Ground was broken on March 24, 1900. The original subway, which took opened October 27, 1904,… Read More
This facility was typical of others in the country that made small spherical lead shot for the fowling pieces of frontier settlers. Smelted lead from the nearby Austinville mines was melted at the top of the tower and poured through a sizing sieve to produce small droplets. Surface tension caused… Read More
The Jake Brake permits large trucks to descend long, steep grades at a controlled speed. It was the first practical mechanism for altering on demand the valve timing on a truck diesel engine, thereby converting the engine to a power absorbing machine. The modified engine can continue to power the… Read More
Although not the first four-wheel-drive vehicle or the first designed for rough, multipurpose field use, the Jeep MB was built as an unusual combination of these and other features of modern vehicle design in the World War II era.
The prototype four-cylinder "Quad" was designed in 1940-…
Read More
The oscillating steam engine, built by John Penn & Sons, is located aboard the famed paddle steamer Diesbar. Diesbar is the second oldest of a fleet of nine paddle steamers in Dresden. What makes the Diesbar unique is its coal fueled engine and single deck design. The John Penn and Sons…
Read More
This is one of several, similar inclines built in western Pennsylvania during the late 19th century. It was designed by Samuel Diescher (1839-1915) after the great flood of 1889, to provide an efficient means of transportation between Westmont and the Conemaugh Valley. (See also the Monogahela…
Read More
This ironworks exemplified the adaptability required for industrial survival in a dynamic technical environment. It was a major western producer of mechanical equipment used in mining (especially large hydraulic machines), ship propulsion, irrigation, power generation, optical telescope mounts,…
Read More
This Kaplan turbine is one of the first three machines to be put into service in the United States. Named for its Austrian inventor, Viktor Kaplan (1876-1934), the turbine was an outstanding innovation, operating with a high, nearly constant efficiency over a wide load range. The machine was built… Read More
This is one of the earliest US foundry-machine shops remaining in operation and one of the few water powered. It was founded by Samuel N. Knight (1838-1913) to manufacture machinery for the gold mines of the …
Read More