Equipment, Harvesting and Baling

Pickup Forage Harvester
Pickup Forage Harvester
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1930-1949 DateCreated: 1931 Agricultural Engineering Laboratory, University of Wisconsin Madison State: WI Zip: 53911 Country: USA Website: https://www.asabe.org/awards-landmarks/asabe-historic-landmarks/forage-harvester-22.aspx Creator: Saiberlich, Erwin W.

William J. Conroy Of Aylmer, Quebec, Received Patent No. 465,127 On The First Field Hay Chopper On 15 December, 1891. Its Sickle Cut The Crop, Which Was Elevated Directly Into A Cylindrical Curved-Bar Cutterhead. It Was Not Commercially Successful, But It Recognized The Need.

Professor Floyd Waldo Duffee, Agricultural Engineering Department, University Of Wisconsin, Built And Field Tested A Silo Filler With An Attached Hay Loader In 1926. He Presented The Specifications Of A Complete Unified Harvester To The National Asabe Meeting In 1927.

YearAdded:
1988
Image Credit: Courtesy Flickr/Bob Adams (CC BY-SA 2.0) Image Caption: Claas Jaguar 870 forage harvester with pickup header Era_date_from:
Massey-Harris #20 Combine
Massey-Harris #20 Combine
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1930s DateCreated: 1938 Ford Museum Dearborn State: MI Zip: 48124 Country: USA Website: https://www.asabe.org/awards-landmarks/asabe-historic-landmarks/massey-harris-20-combine-15.aspx, https://www.thehenryford.org/collections-and-research/digital-collections/artifact/18684/#slide=gs-274942 Creator: Carroll, Thomas

Designated A Historic Landmark Of Agricultural Engineering The Massey-Harris No. 20 was the First Commercially- Successful Self-Propelled Combine Used to Harvest Small Grains Under a Wide Variety of Conditions, World-Wide. Engineered By Thomas Carroll, Chief Engineer, Aided by Robert Ashton and Albert Luke, Principal Assistants, it was First Marketed in 1938 by the Massey-Harris Company. This Combine Opened a New Era an Farm Mechanization and Revolutionized the Grain Harvesting Process. Forty-Four Years Later, This Same Harvesting Principle Continues to be Used Throughout the World.

YearAdded:
1982
Image Credit: Image Caption: Combine pictured at the Henry Ford Museum in Dearborn, MI Era_date_from:
Hume-Love Cutterbar and Reel
Hume-Love Cutterbar and Reel
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1930s DateCreated: 1930 Horn School Rest Area Rosalia State: WA Zip: 99170 Country: USA Website: https://www.asabe.org/awards-landmarks/asabe-historic-landmarks/hume-love-cutterbar-29.aspx Creator: Hume, Horace D.

Near This Location In The 1930's James E. Love And Horace D. Hume Of Garfield, Washington, Invented The Flexible Floating Cutterbar And The Tined Pickup Reel To Harvest Low-Growing, Fragile Crops. These Devices Were Developed For The Local Crops Of Dry Peas And Lentils And Were Then Adopted Nationwide To Soybeans And Other Low-Growing Crops That Tangle And Lodge. These Mechanisms Reduced Dry Pea Harvesting Costs By 28% And Crop Loss From 50 To 10%. These Inventions Were Reported To Save The Equivalent Of 2,750,000 Acres Of Soybeans Annually.

YearAdded:
1993
Image Credit: Image Caption: Era_date_from:
Corn Silage Harvester
Corn Silage Harvester
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1890-1899 DateCreated: 1892 Biosystems and Agricultural Engineering Building Falcon Heights State: MN Zip: 55108 Country: USA Website: https://www.asabe.org/awards-landmarks/asabe-historic-landmarks/corn-silage-harvester-26.aspx Creator:

Charles C. Fenno Of Grinnell, Ia, Patented The First Field Corn Silage Harvester On April 19, 1892. His Ground-Powered Machine Cut The Corn Plant And Fed The Tassel End First To A Rotary Cutter. Joseph Weigel Of Flandreau, Sd, Improved Fenno's Harvester In 1912 By Adding An Engine To Power The Cutter And By Feeding The Stalks Butt End First. Andrean And Adolph Ronning, Farmers Of Boyd, Mn Patented Further Improvements In 1915. In 1918 The American Harvester Co. Of Minneapolis, Mn, Began Manufacturing The Horse-Drawn Ronning Harvester Using Weigel's Patent Too.

YearAdded:
1992
Image Credit: Image Caption: Era_date_from:
Ann Arbor Baler
Ann Arbor Baler
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1920-1929 DateCreated: 1929 Shelbyville State: IL Zip: Country: USA Website: https://www.asabe.org/awards-landmarks/asabe-historic-landmarks/ann-arbor-baler-13.aspx Creator: Raymore McDonald

Designated an Historic Landmark of Agricultural Engineering. In the Shelbyville Area During the Spring of 1929, Raymore McDonald Designed and Developed the First Commercial Pick-Up Baler as Conceived and Financed by Horace Tallman and His Sons, Leslie R. and Gentry L. These Balers were Marketed for Many Years by the Ann Arbor Machine Company of Shelbyville. This Concept of Field Processing of Farm Forages Made a Significant Contribution to the Efficiency and Economy of Mechanized Forage Harvesting in the World's Agriculture.

YearAdded:
Image Credit: Courtesy Flickr/Wystan (CC BY 2.0) Image Caption: 1904 advertisement for the Ann Arbor Era_date_from:
McCormick Reaper
McCormick Reaper
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1830-1839 DateCreated: 1831 McCormick Farm Raphine State: VA Zip: 24472 Country: USA Website: http://www.asabe.org/awards-landmarks/asabe-historic-landmarks/mccormick-reaper-4.aspx Creator: McCormick, Cyrus Hall

McCormick was born on the 620-acre farm known historically as “Walnut Grove Farm” in 1809.  He built the first practical grain reaper, which was successfully demonstrated in a field of oats owned by John Steele in nearby Steeles Tavern in 1831.  

YearAdded:
1972
Image Credit: Courtesy of the Shenandoah Valley Agricultural Research and Extension Center. Image Caption: The McCormick reaper was first demonstrated at the Walnut Grove Farm in Virginia. Era_date_from: 1831
"Old Red" Cotton Picker
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1940-1949 DateCreated: 1943 National Museum of History & Technology Washington State: DC Zip: 20560 Country: USA Website: http://www.asabe.org/awards-landmarks/asabe-historic-landmarks/old-red-cotton-picker-10.aspx Creator: Rust, John, Rust, Mack
"The development of the cotton picker was the most important single factor which enabled the American cotton industry to stay alive," observed Dr. George S. Buck, Jr., director of research for the National Cotton Council recenty. Some 96% of the 1969 U.S. cotton crop was harvested by machines, points out J.W. Wegener, manager of International Harvester's Memphis Works manager. "Old Red" was built by International Harvester in 1943, retired in 1959, and restored in 1964.
YearAdded:
1978
Image Credit: Photo Courtesy of ASABE Image Caption: "Old Red" now resides in the National Museum of History & Technology, Smithsonian Institution, Washington, DC. Era_date_from: 1943
The Cotton Module Builder
The Cotton Module Builder
Society: ASABE Main Category: Agricultural & Biological Sub Category: Equipment, Harvesting and Baling Era: 1970-1979 DateCreated: 1971 Scoates Hall College Station State: TX Zip: Country: USA Website: http://www.asabe.org/awards-landmarks/asabe-historic-landmarks/cotton-module-builder-40.aspx Creator: Wilkes, Lambert , Jones, J.K. "Farmer"
Cotton was once transported from farms to gins by wagons, trucks or trailers. Long waits to unload at the gin stalled harvests until haulers could return to the fields. Professor Lambert Wilkes of the Department of Agricultural Engineering, Texas A&M University, developed the Cotton Module Builder between 1971 and 1974 with the support of J.K. (Farmer) Jones of Cotton Incorporated. The modules created by the Cotton Module Builder withstood weather, and after transport, the cotton could be easily fed into the gin. Dr.
YearAdded:
2002
Image Credit: Photo by Beaver (Thomas John Macartney) Image Caption: The cotton module builder revolutionized the cotton industry. Era_date_from: 1971
Subscribe to Equipment, Harvesting and Baling
The Cotton Module Builder

The Cotton Module Builder

Cotton was once transported from farms to gins by wagons, trucks or trailers. Long waits to unload at the gin stalled harvests until haulers could return to the fields. Professor Lambert Wilkes of the Department of Agricultural Engineering, Texas A&M University, developed the Cotton Module… Read More

"Old Red" Cotton Picker

"The development of the cotton picker was the most important single factor which enabled the American cotton industry to stay alive," observed Dr. George S. Buck, Jr., director of research for the National Cotton Council recenty. Some 96% of the 1969 U.S. cotton crop was harvested by machines,… Read More
McCormick Reaper

McCormick Reaper

McCormick was born on the 620-acre farm known historically as “Walnut Grove Farm” in 1809.  He built the first practical grain reaper, which was successfully demonstrated in a field of oats owned by John Steele in nearby Steeles Tavern in 1831.  

Patented in 1834, the reaper is credited…

Read More
Ann Arbor Baler

Ann Arbor Baler

Designated an Historic Landmark of Agricultural Engineering. In the Shelbyville Area During the Spring of 1929, Raymore McDonald Designed and Developed the First Commercial Pick-Up Baler as Conceived and Financed by Horace Tallman and His Sons, Leslie R. and Gentry L. These Balers were…

Read More
Corn Silage Harvester

Corn Silage Harvester

Charles C. Fenno Of Grinnell, Ia, Patented The First Field Corn Silage Harvester On April 19, 1892. His Ground-Powered Machine Cut The Corn Plant And Fed The Tassel End First To A Rotary Cutter. Joseph Weigel Of Flandreau, Sd, Improved Fenno's Harvester In 1912 By Adding An Engine To…

Read More
Hume-Love Cutterbar and Reel

Hume-Love Cutterbar and Reel

Near This Location In The 1930's James E. Love And Horace D. Hume Of Garfield, Washington, Invented The Flexible Floating Cutterbar And The Tined Pickup Reel To Harvest Low-Growing, Fragile Crops. These Devices Were Developed For The Local Crops Of Dry Peas And Lentils And Were Then…

Read More
Massey-Harris #20 Combine

Massey-Harris #20 Combine

Designated A Historic Landmark Of Agricultural Engineering The Massey-Harris No. 20 was the First Commercially- Successful Self-Propelled Combine Used to Harvest Small Grains Under a Wide Variety of Conditions, World-Wide. Engineered By Thomas Carroll, Chief Engineer, Aided by Robert…

Read More
Pickup Forage Harvester

Pickup Forage Harvester

William J. Conroy Of Aylmer, Quebec, Received Patent No. 465,127 On The First Field Hay Chopper On 15 December, 1891. Its Sickle Cut The Crop, Which Was Elevated Directly Into A Cylindrical Curved-Bar Cutterhead. It Was Not Commercially Successful, But It Recognized The Need.

… Read More

We hope you enjoyed this essay.

Please support this 70-year tradition of trusted historical writing and the volunteers that sustain it with a donation to American Heritage.

Donate

Help us save
Stay informed - subscribe to our newsletter.
The subscriber's email address.